28RC USB Pager Programmer
A USB programmer for GEO 28 series pagers, used to set frequencies, capcodes and functions from a PC.
£388.13 ex VAT£465.76 inc VAT
A 5 zone 12 V DC PageTek 4 programmable paging transmitter that sends zone messages to pagers and receivers when an input is triggered. Supplied with aerial.
PageTek 4 is a flexible programmable UHF transmitter that automatically sends messages to radio pagers and fixed receivers when a switched input opens or closes. Each zone can send its own message, with configurable repeat intervals and optional secondary messages. Zones accept volt-free or voltage triggers and can be set as normally open, normally closed or change of state. Programming uses Scope’s Windows software and a USB cable, with settings held in non-volatile memory. Low battery signalling, an In Service call and a tamper zone are included, and the 10 zone model adds a Burglar Alarm mode with entry, exit and transit zones.
Manufacturer: Scope Communications UK
Product type: programmable UHF paging transmitter
Model range: PageTek 4
Frequency: 459 MHz (range 446.000 to 469.700 MHz, subject to licensing conditions)
RF output: 1 W max
Inputs: dry contact or voltage (5 to 18 V), configurable per zone
Outputs: open collector (siren) output 1 A max; relay output for power fail
Programming: USB port (programming kit required)
Supplied with: aerial
Model: PT4-05-12V
Zones: 5
Power: 12 to 13.8 V DC, 0.8 A max
Footprint: 185 x 140 x 42 mm (H x W x D); 335 mm high with 14BNC aerial